Search
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
  • Artists
  • Blog
  • Support / Contact Us
    • Search
      Generic filters
      Exact matches only
      Search in title
      Search in content
      Search in excerpt

JACK RABBIT Pedal

SUH03JAC0002X

Jack Rabbit is a high quality analog pedal, that delivers a wide variety of tremolo effects – from warm wobble to whacked out. It features simple control over tempo by incorporating both tap, and strum tempo modes. It’s modulation rate spans from 1Hz to 20Hz and utilizes a tempo subdivision switch. The 1/8” stereo TRS input jack called FX LINK allows the pedal to be controlled by an external switch box or effects switching system with TRS control output jacks, such as the BOSS® ES-8 or ES-5.

Controls

Jack Rabbit features a flexible and easy to tweak layout. Rate: Controls the speed of the tremolo effect, from 1Hz to 20Hz. Level: Controls the output level of the pedal, from +0dB to +14dB. Depth: Controls the depth of the tremolo effect. Waveform: Selects the modulation waveform which includes Sine, Square, Triangle, Reverse Ramp, and Ramp.

Tempo Controls

TEMPO SUBDIVISION SWITCH: Jack Rabbit features quarter note, eighth note, and quarter note triplet subdivisions. TAP TEMPO: In addition to using the Rate control, the tempo can be set by using the built in tap tempo and strum tempo modes. Tap tempo is accessed by pressing and holding Jack Rabbit’s footswitch for approximately one second (please see the manual for details).

ADVANCED FEATURES

True Bypass: Jack Rabbit is true bypass via a relay. This function allows for the remote switching, and the battery monitor feature. The relay produces less popping when switching the pedal on and off. FX Link: The FX Link connector allows the pedal’s switching and tap tempo function to be controlled from an external switch, pedal board, loop switcher, or any other custom interface. FX Link also provides the ability to power up in the On/Off state. Low Battery Monitor: A unique battery monitor circuit alerts the user to low battery conditions. In addition, the battery monitor will automatically switch the pedal to True Bypass if the battery voltage is too low for the circuitry to correctly operate.

Identical circuit and tone of the Jack Rabbit Ver 2.0 Circuit.

319,00

RESELLERS:
DETAILS:

Input Impedance: 1M Ohm

Output Impedance: 600 Ohm

Power Connector: 9Vdc regulated, center negative, 2.1mm x 5.5mm

Operating Voltage: 5V to 18V (nominal 9V)

Maximum Voltage: 20Vdc

Reverse Battery Protection: Yes

Over Voltage Protection: Yes

Current Consumption: < 20mA Estimated Battery Life: 25-50 hours of continuous use FX Link Connector: 1/8″ Stereo FX Link Max Voltage: 3.3Vdc Shield → Tip: Activate On/Off Shield → Ring: Activate Tap Tempo ROHS Compliant: Yes Dimensions: 2.5”(W) x 4.5”(D) x 1.25”(H) Weight: 0.75lb

Backline Srl
Via Calabria 3
20158 Milano
Phone +39 02 82396445

P.I. 12491290156

Subscribe to our newsletter